lightware Cone , accordion

¥550¥41,250

A liberation of shadow and light

“Cone, accordion” is a lighting fixture with an antique feel manufactured by TOBIMATSU TOKI.
The accordion-pleat lampshades are designed to be mounted to ceilings. The edges of the shades are turned slightly inwards, trapping light inside the pleats to create contrasting shadows when the light is on. As if to complement these shadows, the lamp releases a burst of light that diffuses from the bottom of the shade.

Mold growth:
We do not repair any scratches on the mold caused through use or chips that may occur once the molds are divided. Such scratches and/or chips exist as part of the shade itself and we aim to highlight the process involved further going forward via new shades. This lighting series allows people to enjoy such differences in the ‘mold growth’; appreciating how little changes can enhance its overall fixed shape.

“Lampshades” and “Lampholder” are sold separately. Please purchase together. All back order.
* We will sell the lampshade alone (without the Lampholder), but we do not sell the Lampholder alone.

lampshade Cone M, Accordion (open) / white
¥38,500
lampshade Cone M (half), accordion / white
¥41,250
lampshade Cone M, Accordion (close) / white
¥41,250
Cone S, Accordion (open) / white
¥27,500
Cone S, Accordion (herf) / white
¥27,500
Cone S, Accordion (close) / white
¥27,500
Lamp fitting / white (Default cord length: 400 mm)
¥4,400
Lamp fitting / umber (Default cord length: 400 mm)
¥4,400
Lamp fitting / black (Default cord length: 400 mm)
¥4,400
Ceiling cover / brass-gold
¥2,200

¥2,530
Lighting total length change cost.(Only if the total lighting length needs to be other than 500mm.)
¥550

Description

Cone M , accordion open: 213"diam × 100"H mm (350 g)
half: 213"diam × 120"H mm (420 g)
close: 213"diam × 125"H mm (500 g)
Materials: Porcelain
Surface finishing: Unglazed

* Default lighting total length including lampholder: 500"L mm
Cone S , accordion open: 155"diam × 68"H mm (170 g)
half: 155"diam × 68"H mm (190 g)
close: 155"diam × 68"H mm (210 g)
Materials: Porcelain
Surface finishing: Unglazed

* Default lighting total length including lampholder: 500"L mm
Lampholder Default: Adjust the cord of the lampholder to a total lighting length of 500 mm including the lampshade.

Color:
White: cord-white, socket-gold, gallery-golg
Unber: cord-unber, socket-gold, gallery-golg
Black: cord-black, socket-black, gallery-black

Specification:
PSE
Voltage rating: 100V, 50/60Hz
(For use outside of Japan: Up to 300V)
Light bulb not included.
Light bulb: E17 base, (Recommended up to 60W in Japan)
Ceiling cover 90"diam × 40"H mm
Weight: 65 g
Materials: Brass
Surface finishing: Buffing-brass(golg), Sulfide-fumigation(black)
Others Lampshade and lampholder are sold separately.
  • M size and S size

    M size and S size

  • There are 3 types of M size.

    Size M is available in three styles: Open (right), Half (center), and Close (left).

  • There are 3 types of S size.

    Size S is available in three styles: Open (right), Half (left), and Close (center).


    *Due to the height of its lampshade, size S is recommended to be used with a smaller-sized, 20-watt miniature light bulb.

  • Three holes for mounting.

    Three holes for mounting.

  • All lighting parts sold separately.

    All lighting parts sold separately.

  • Lamp fitting / black (Default cord length: 400 mm)

    The lamps are available in three colors: White, Amber, and Black.
    By default, the cord can be adjusted to a max of 500mm; including the lampshade itself.

  • Ceiling cover

    2 colors available for the ceiling cover; Brass and Dyed black dyed.
    When installing with the ceiling cover, please note the size that fits inside the cover is limited. Please endeavor to check the allowable range image inside the ceiling cover before purchase.

  • The ceiling cover can be fixed in any position on the cord via the bottom screw.

  • Lighting total length change cost.(Only if the total lighting length needs to be other than 500mm.)

    When requesting a change in the total light length (sold separately), please note that the total length of each light can be changed to up to 1,000mm per purchase. Please endeavor to enter your desired light length in the order memo.
    Example: If you want a light length of 1,001-2,000mm, please purchase 2.

lightware Cone , Accordion

Important points

  • Differences in size, shape, etc., and distortion peculiar to pottery may occur.
    There may also be protrusions on the shade where scratches on the mold have occurred. Please understand this is the artist's intention before purchase.
  • Do not hit or drop the product as this may cause damage.
  • Sサイズはシェード高さの関係上、電球は小ぶりな20W豆電球のご利用をお勧めいたします。
  • Please only hang the lampholder once you have confirmed it is firmly attached to the lampshade.
  • The lampshade and the lampholder are sold separately. Please purchase together.
    The lampshade can be purchased without the lampholder, however the lampholder cannot be purchased without the lampshade.
  • When requesting a change in the total light length (sold separately), please note that the total length of each light can be changed to up to 1,000mm per purchase. Please endeavor to enter your desired light length in the order memo.
  • When installing with the ceiling cover, please note the size that fits inside the cover is limited. Please endeavor to check the allowable range image inside the ceiling cover before purchase.
    The ceiling cover can be fixed in any position on the cord via the bottom screw.
  • We do not accept any changes in the total light length due to a change in the cord length after delivery of the product.
  • We do not accept cash-on-delivery for orders of this product.

Regarding Delivery / Gifting

Delivery Time 2~3 months after backorder.
Delivery Type International shipping (outside Japan)
Express home delivery

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.